Petromax HK 500 start get good light after 5 min all top parts is glowing and the mante is flaming and burning
Petromax 500 problem get glowing
-
-
.
-
Hi Skipper,
to find out if the lantern works perfectly and to eliminate malfunktion, please look here:
a technical description on how to perform a complete cleaning and restoration of a PETROMAX 829 500
Regards, Gerald
-
Thanks for answer i have just bought a spare part kit, here in Gotenburg. I will do some new test during the weekend. But I think it is strange it lights so fin in 5 min, and then isaw that the grenerator start to glow the light go down and flame comes out
//Kim
-
Hi Skipper / Kim,
also check that the U-shaped metal (brass) tube (mixing tube) is free of obstructions.
Sometimes, insects e.g. small spiders build nests in there (not joking!).
This hinders the free, fast flow of the evaporated gas and in turn can cause overheating
(yes, it is difficult to check without destroying the mantle, so be sure to have a new one at hand)
Good Luck and greetings to Gotenburg !
/Matt.
-
Thanks Matt
but how do you clen that part?
-
You should dismount the hood, then upper part of the lamp (just lift off),, unscrew the clay burner (yes, it is screwed), then the mixing chamber, maybe also loosen the clamp screw, then you have good access.
The tube is 10-12 mm wide, so anything in the household flexible enough to "wipe through" there will do, be it only a small piece of cloth if nothing else is at hand.
-
Thanks All now it is working perfect
//Kim
-
Have you located the exact source of the problem as there were several possibilities mentioned as a potential source?
-
Hi
No I did all and after that it worked
/Kim
-
Nice to hear that it worked out.
Yes , sometimes those beasts just want some attention and tender care to be good again - just like women .
And nobody knows what the exact fault was before
-
-